高韧性合金钢断裂韧性及疲劳裂纹扩展门槛值的联合试验方法

在柴油机曲轴、连杆等关键零部件的可靠性设计和失效评估中,断裂韧性及疲劳裂纹扩展门槛值分别是衡量材料抵抗裂纹失稳扩展和裂纹开始扩展的重要指标．但是,对于高韧性合金材料,难以通过常规试验所推荐的厚度确定平面应变断裂韧性,而门槛值的测定通常不但非常耗时,且难以直接应用于不同循环特性的实际结构．本文针对高韧性合金钢34CrNi3MoA,提出一种将断裂韧性和疲劳裂纹扩展门槛值试验合二为一的试验方法,即用同一个试件可以同时测定门槛值和断裂韧性．利用断裂韧性关于试件厚度的渐近特性,以几种较薄试件的试验,确定平面应变状态下的断裂韧性．试验结果还表明,裂纹扩展门槛值的试件厚度依存性可以忽略,并给出了任意循环特性（应力比）下的门槛值计算公式．     

Software lens compensation applied to athermalization of infrared imaging systems

A different approach, aiming to achieve the constant blur status of point-spread function (PSF) at a certain defocused plane, is described. The correlation between the two PSF is used to control the PSF blur similarity, and simultaneously the Strehl ratio is also used to control the PSF blur minimization. By designing the PSF so that it is significantly insensitive to defocus or related defocus quantity, for example, due to temperature change, all the constantly blurred images can be accurately de-blurred by a simple inverse restoration filter for an adequate range of defocus. We refer to that as “software lens compensation” and apply a design method to solve the athermalization of middle wavelength infrared (MWIR) imaging systems. The resultant PSF is almost invariant in the temperature range from −10 to 50°C at the same focal plane. Consequently, the constant blur spot can be removed by a simple digital signal processing. Thus, clear and sharp de-blurred images at different temperatures are obtained.     

Effect of the defect on the focusing in a two-dimensional photonic-crystal-based flat lens

We have investigated in detail the influence of defect on the focusing of electromagnetic waves in a two-dimensional photonic-crystal flat lens by using the finite-difference time-domain method. The result shows that many focusings can be observed at the symmetrical positions when a defect is introduced into the lens. Furthermore, the wave-guides in the lens can confine the transmission wave effectively and improve the quality of the focusing.     

Synchronization and coherent combining of two pulsed fiber lasers

We demonstrate a scalable architecture for coherent combining of pulsed fiber lasers.A new method for generating synchronous pulsed fiber lasers by direct phase modulation is proposed and investigated.It is shown that phase modulated mutually coupled laser array can be a steady synchronous pulsed fiber laser source.The synchronous pulsed fiber lasers are coherently combined with an invariable phase difference of π in adjacent lasers.Neither active phase control nor polarization control is taken in our experiment.     

一种时序逻辑网络的快速设计方法

引用1984年尹克震提出的“开关函数的反演公式”,采用伪随机序列技术的思想,提出移位寄存器型时序逻辑网络的一种快速设计方法。     

193nm光刻曝光系统的现状及发展

投影曝光工艺是集成电路制造过程中的关键环节，曝光系统的工艺水平已成为衡量微电子制造技术的重要标志。重点介绍了目前193nm光刻设备曝光系统的发展现状和趋势，以及为提高曝光质量所采用的相关分辨率增强技术；通过分析曝光系统的构成和其中的关键技术，探讨了国内研制相关曝光设备所面临的挑战。     

梯度折射率棒透镜的色差模型

本文提出一个梯度折射率棒透镜(GRIN－RodLens)的色差模型,并运用本模型合理地解释了在色差测量过程发现的各类色差现象.     

透镜不胶盘单件抛光技术

本文介绍了在ＹＧ３６６高速抛光机上进行的透镜不胶盘单件抛光技术。这一新的抛光方法比弹性成盘法和刚性成盘法有许多优点：它省掉了许多辅助工序，缩短了抛光时间，所以生产周期短，效率高，成本低。同时给出了根据透镜的结构参数进行生产技术准备和评估抛光过程稳定性的公式。最后提出了进一步改进的设想。     

Aberration-corrected catadioptric magnifiers useful for simple microfiche readers

The present paper considers the magnifying power and aberration properties of three different catadioptric magnifying systems useful for application as simple hand-held microfiche readers. These are in the form of a plano-convex lens, a meniscus lens and an achromatic doublet lens and all their outer surfaces have been coated with a semi-reflecting film so that they behave like catadioptric elements. These can be designed to give magnification in the range of 15 × to 25 × with sufficient eye relief. Using such magnifiers, it is possible to read microfiche having frame sizes of 16 × 12 mm and 12 × 9 mm. The cemented achromatic doublet coated on the outer surfaces seems to give a very good image for use in microfiche reader.     

Solvent effects on the asymmetric Diels–Alder reaction between cyclopentadiene and (−)-menthyl acrylate revisited with the three-layer hybrid local self-consistent field/molecular mechanics/self-consistent reaction field method

The construction of the three-layer hybrid local self-consistent field/molecular mechanics/self-consistent reaction field method is detailed. This method is specifically devoted to the study of the reactivity of large chemical systems in solution. The solvent, modeled by a polarizable continuum, surrounds the whole solute molecule. Solute–solvent interactions are taken into account by means of the self-consistent reaction field approach. The solute system is treated by both quantum and molecular mechanics, the former being principally applied to the reactive part, i.e., the part undertaking bond forming or breaking, the latter being reserved for the ancillary encumbering groups. The connection between the molecular mechanics and the quantum mechanics part is accomplished by a strictly localized bond orbital that remains frozen within the local self-consistent field framework. As a test system, the asymmetric Diels–Alder reaction between cyclopentadiene and (–)-menthyl acrylate is studied for the first time with steric interactions and electrostatic solvent effects taken into account simultaneously. The results indicate that the coupling of both interactions leads to conclusions that could not have been guessed from separate calculations.Proceedings of the 11th International Congress of Quantum chemistry satellite meeting in honour of Jean-Louis Rivail